14” LED Ceiling Light with Mood Lighting and Motion Sensor

LM57176

Elegant and functional in design, the Koda 14” LED Ceiling Light with Mood Lighting and Motion Sensor provides the ultimate lighting solution for any room in your home.

Enjoy a ceiling light that’s easy to install and comes with a handy remote control that allows you to create your ideal lighting mood. More than a traditional ceiling light, the Koda 14” LED Ceiling Light with Mood Lighting and Motion Sensor allows you to choose from 16 different color options, as well as adjust color temperature and brightness level. Walk into any room without having to flip a light switch with motion sensing technology that can be adjusted and tailored to maximize light efficiency in your home.

Whether you’re looking for a new light for your bedroom, hallway or laundry room, the Koda 14” LED Ceiling Light with Mood Lighting and Motion Sensor fits any standard ceiling light fixture and will also look great in any other room in your home. 


  • Features
  • Spec
  • Manual

BRIGHT LED LIGHT

SUITABLE FOR ALL ROOMS

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

A MOOD FOR EVERY ROOM

REMOTE CONTROL

SET YOUR ENVIRONMENT WITH EASE


ADVANCED MOTION SENSING TECHNOLOGY

TURN THE LIGHT ON AND OFF AS YOU ENTER AND LEAVE THE ROOM




Dimension:
14.2" (L) x 14.2" (W) x 2.9" (H)
36.1cm (L) x 36.1cm (W) x 7.4cm (H)
Operating Voltage:
120 Vac, 60 Hz
Wattage:
24 W Max (Main Light);
6 W Max (Mood Lighting)
Light Output:
1600 LM (Main Light)
Color Temperature:
2700K – 5000K (Main Light)
LED Life Cycles:
up to 50,000 hours*
*50,000-hour lifespan is for the LED only. Lifespan depends on operating temperature, environmental conditions, etc.
CRI:
90 (Main Light)
Operating Temperature:
0°C to 40°C / 32°F to 104°F

This product is ETL/cETL Listed

PACKAGE CONTAINS:

1 x LED Ceiling Light with Mood Lighting
1 x Wireless Remote
1 x Remote Control Setting Label
2 x Screws
3 x Wire Nuts
2 x AAA Batteries

INSTALLATION PROCEDURE:

1. Rotate the cover (Part B) counterclockwise to detach it from the lamp body (Part A).
2. Install the mounting screws into outlet box until there is about 12.7 mm / 0.5 in between the ceiling and underside of the screw head.

Warning: Never connect the ground wire to the hot or neutral power supply wires.
3. Make the following spliced wire connections using wire nuts:
 
• White (neutral) supply wire to the common/ neutral wire from the outlet box (most likely white).
 
• Black (hot) supply wire to the hot wire from the outlet box (most likely black or colored).
 
• Green (ground) supply wire to the ground wire from the outlet box (most likely bare copper, green wire, or green and yellow wire), or wrap around the ground screw if ground wire does not exist.
 
Screw the wire nuts in a clockwise direction. Make sure no bare wire or wire strands are visible after making the connections. Consult with a qualified electrician if you have any electrical questions or if your current power supply does not include a ground wire.
 
 

4. Carefully place all the wires and wire connections into the outlet box.
5. Place the lamp body over the outlet box and feed the mounting screws through the inner keyhole slots. There are two pairs of keyhole slots. Please choose the appropriate pair of keyhole slots to fit with the of outlet box.
6. Rotate the lamp body clockwise so that the mounting screws slide into the narrow ends of the keyhole slots.

7. Tighten the mounting screws with the screwdriver to ensure the lamp body is secured against the ceiling.
8. Attach the cover to the lamp body and rotate the cover clockwise to secure in place. To ensure complete securement, please rotate the cover until you cannot rotate further.
9. When the installation is finished, you can turn on the main power switch and the light will turn on. If the light does not turn on, please refer to the Troubleshooting section on page 9 of this manual.
  • Features
  • Specifications
  • Instruction Manual

BRIGHT LED LIGHT

SUITABLE FOR ALL ROOMS

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

SET YOUR MOOD

16 COLOR OPTIONS
4 AMBIANCE MODES

50,000 HOUR
LIFESPAN*

1,600 LUMENS

ADJUSTABLE
BRIGHTNESS

ADJUSTABLE
COLOR TEMPERATURE

A MOOD FOR
EVERY ROOM

REMOTE CONTROL

SET YOUR ENVIRONMENT
WITH EASE


ADVANCED MOTION SENSING TECHNOLOGY

TURN THE LIGHT ON AND OFF AS YOU ENTER AND LEAVE THE ROOM


Dimension:
14.2" (L) x 14.2" (W) x 2.9" (H)
36.1cm (L) x 36.1cm (W) x 7.4cm (H)
Operating Voltage:
120 Vac, 60 Hz
Wattage:
24 W Max (Main Light);
6 W Max (Mood Lighting)
Light Output:
1600 LM (Main Light)
Color Temperature:
2700K – 5000K (Main Light)
LED Life Cycles:
up to 50,000 hours*
*50,000-hour lifespan is for the LED only. Lifespan depends on operating temperature, environmental conditions, etc.
CRI:
90 (Main Light)
Operating Temperature:
0°C to 40°C / 32°F to 104°F

This product is ETL/cETL Listed

PACKAGE CONTAINS:

1 x LED Ceiling Light with Mood Lighting
1 x Wireless Remote
1 x Remote Control Setting Label
2 x Screws
3 x Wire Nuts
2 x AAA Batteries

INSTALLATION PROCEDURE:

1. Rotate the cover (Part B) counterclockwise to detach it from the lamp body (Part A).
2. Install the mounting screws into outlet box until there is about 12.7 mm / 0.5 in between the ceiling and underside of the screw head.

Warning: Never connect the ground wire to the hot or neutral power supply wires.
3. Make the following spliced wire connections using wire nuts:
 
• White (neutral) supply wire to the common/ neutral wire from the outlet box (most likely white).
 
• Black (hot) supply wire to the hot wire from the outlet box (most likely black or colored).
 
• Green (ground) supply wire to the ground wire from the outlet box (most likely bare copper, green wire, or green and yellow wire), or wrap around the ground screw if ground wire does not exist.
 
Screw the wire nuts in a clockwise direction. Make sure no bare wire or wire strands are visible after making the connections. Consult with a qualified electrician if you have any electrical questions or if your current power supply does not include a ground wire.
 
 

4. Carefully place all the wires and wire connections into the outlet box.
5. Place the lamp body over the outlet box and feed the mounting screws through the inner keyhole slots. There are two pairs of keyhole slots. Please choose the appropriate pair of keyhole slots to fit with the of outlet box.
6. Rotate the lamp body clockwise so that the mounting screws slide into the narrow ends of the keyhole slots.

7. Tighten the mounting screws with the screwdriver to ensure the lamp body is secured against the ceiling.
8. Attach the cover to the lamp body and rotate the cover clockwise to secure in place. To ensure complete securement, please rotate the cover until you cannot rotate further.
9. When the installation is finished, you can turn on the main power switch and the light will turn on. If the light does not turn on, please refer to the Troubleshooting section on page 9 of this manual.

Sign up today!

To get the latest on sales, new releases and more…